Table of Contents
Advertisement
To stop
Press (STOP).
operation
oTo resume playback, press (NEW MESSAGE).
olf you do not press any button for 60 seconds or if you press
again, the unit will return to the stand-by mode.
For Caller ID service users (p. 38) |
During playback, when the handset is on the base unit, the handset
display will show the name and/or number of the caller whose message is
being played.
To call back the displayed number:
1. During playback, lift the handset.
2. Press
within 10 seconds.
—The unit stops playback and automatically dials the displayed phone
number.
i
o After listening to new incoming messages, "V" will be added to the call
entries in the Caller ID Caller List (p. 41).
From the Handset
If someone else is in the room and you want to listen to the recorded
messages privately, you can use the handset.
1
Handset:
Press (PLAYBACK).
The number of new messages is heard on the handset.
SM
2
Base unit:
To listen to new messages, press
briefly. To listen
to all messages, press and hold
until playback
starts.
e The messages will be heard on the
handset.
e|REPEAT/REW),
(SKIP/FF) and
STOP} can also be used during
playback (p. 52, 53).
When finished, press (PLAYBACK)
or place the handset on the base
unit.
eYou can also listen to messages without using the base unit. See page 66.
53
Advertisement
Table of Contents
