Table of Contents
Advertisement
Recharge
Recharge the battery when:
—'Recharge' is displayed on the handset,
—"{
1)" flashes on the handset display, or
~—the handset beeps intermittently while it is in use.
olf you DO NOT recharge the handset battery for more than 15 minutes, the
display will keep indicating "Recharge" and/or "{
DJ" will continue to flash.
uONe
Battery information
After your Panasonic battery is fully charged (p. 14):
TALK
*Within about 10 feet (3 m)
oBattery life may be shortened depending on usage conditions, such as viewing
the Caller ID Caller List, and ambient temperature.
oClean the handset and the base unit charge contacts with a soft, dry cloth
once a month. Clean more often if the unit is subject to grease, dust or
high humidity. Otherwise the battery may not charge properly.
olf the battery is fully charged, you do not have to place the handset on the base
unit until "Recharge" is displayed and/or "{
0)" flashes. This will maximize
the battery life.
oThe battery cannot be overcharged.
Stand-by Mode
Handset (While off the base unit)
The handset goes into the stand-by mode after you finish using the
handset (making/answering a call, viewing the Caller List etc.). The
display is blank, but the handset can receive calls. The battery life is
conserved in this mode.
Base unit
The base unit goes into the stand-by mode after you finish using the base
unit (making/answering a call, using the intercom, using the answering
system etc.}. Programming and storing phone numbers are possible only
when the base unit is in the stand-by mode.
15
Advertisement
Table of Contents
