® Pager Call
| Storing a 1-800 pager number
If you use a 1-800 pager number with a PIN code, store the pager
number as follows.
:
1
Press
(PROGRAM).
eThe TALK indicator flashes.
eThe IN USE/CHARGE indicator lights.
Press
(PLAYBACK).
e"p" is displayed on the base unit.
2
3 Press (#).
4
TALK Indicator
e"—" is displayed on the base unit.
© Enter the 1-800 pager number,
and press
3 times.*
;
@ Enter the PIN code, and press
twice."
eThe entered number is displayed on
the base unit.
lf you misdial, press (PROGRAM)
—
and start again from step 1.
You can enter a total of 44 digits.
5 Press (PROGRAM).
$A beep sounds.
* Pager companies require a delay after the pager number and the
|
PIN code are dialed. Contact your pager company regarding the
required pause time. Pressing (REDIAL/PAUSE) once creates a
|
35 5 second delay and counts as one digit.
PROGRAM
REDIAL/PAUSE
zmr
(PLAYBACK
i
elf the line has
E
or pulse service, press (TONE) between the pager number
and (REDIAL/PAUSE) in step 4.
e Alphanumeric voice dispatch pager services will not work with this function.
56