Fisher & Paykel DISHDRAWER DD24STI Installation Manual page 22

IMPORTANT!
Ensure that drain
connection will comply with
local plumbing regulations.
21
DRAINAGE OPTION 3
Dishwasher using drain hose joiner onto sink trap/waste tee
Screw Drain hose
support to back wall
at correct height
If space is limited
for fixing, push
hose through drain
hose support
to required height
4 3/4"
(120mm)
2
max.
1
step 19
min. R 8"
(200mm)
Ensure drain hose is routed
straight to joiner. Remove excess
drain hose material if necessary.
Do not shorten the inlet hose.
Supplied drain
hose joiner to suit
Ø 3/4" (19 mm)
waste tee
3