Fisher & Paykel DISHDRAWER DD24STI Installation Manual page 16

2
Before refitting the
drawer, ensure the hoses
are not twisted and the
latches at the rear of
each drawer runner are
facing forward.
15
!5 B
- REFIT THE DRAWER ONTO THE RUNNERS
1
!6 B
-
1
After routing the vent hose through
and out the hole cutout, attach and
secure the vent by tightening the
four screws provided.
Lift or rotate counter-clockwise the
drawer back onto the drawer runners
on either side.
3
Release tab
SECURE THE EXTERNAL VENT
2
4
Pull the release tabs forward on both
sides 4" (100mm). Ensure the tabs are
fully pulled forward and click into place.