Fisher & Paykel DISHDRAWER DD24STI Installation Manual page 12

!1
RECOMMENDED METHOD (A) - SECURE WITHOUT DRAWER REMOVAL (FRAMELESS CABINETRY ONLY)
!1 A
- ATTACH SIDE MOUNTING BRACKETS
Clip all four side mounting
brackets into their slots using a
flat-bladed screwdriver. Ensure
B
they're securely fitted before
sliding product into cavity.
B
A
A
The mounting slots are in pairs,
one on each side diagonally
across the product. A bracket
must match A slot and B bracket
must match B slot.
When fitting brackets, ensure the
ends are not pushed down into
the chassis.
11
NOW CHOOSE WHICH INSTALLATION METHOD (A) OR (B)
IS MORE SUITABLE FOR YOUR CABINETRY...
A
A
B
B
!2 A
- ATTACH VENTING HOSE
Check that the fitted elbow is
rotated left or right (depending
on the direction of the routing),
then ensure the venting hose is
securely attached to it.
Fitted Elbow