Advertisement
Available languages
Available languages
pOweR SuppLy
INSTALLATION OF THE BATTERIES
·
Open the battery compartment cover (12).
·
Insert 2 x AA Alkaline batteries according to the installation
symbol (ensure correct polarity!). Close the cover.
·
In order to save battery power the receiver will automatically
turn off if it has not received a laser scanning signal for 5
minutes.
·
When the battery symbol of the display starts flashing the
batteries must be replaced.
OpeRaTIOn
Power on/off the receiver
Press the button to power on/off the receiver.
First, all displays light up once briefly (fig. 1).
Then the unit automatically enters the reception mode
(fig. 2).
Select the receiving accuracy
Press the button to select the accuracy mode requested.
The mode selected will be saved automatically after
3 sec. (fig. on the right)
Set the volume
Press the button to set the volume requested.
(a beep sounds to confirm)
(fig. on the right)
1
2
off
medium
EN
C
D
loud
11
Advertisement
