EN
Set the volume
Press the button to set the volume requested.
(a beep sounds to confirm)
(fig. right)
Switch on/off the lighting
Press the button to switch on/off the lighting.
DETECT THE LASER LINE
The laser line is below
the „0" position
·
slow short beep
·
the upper red LED
lights
=> Move the receiver
down
12
The laser line is above
the „0" position
·
fast short beep
·
the lower yellow
LED lights
=> Move the receiver
up
off
The laser line is exact-
ly in „0" position
·
long beep
·
the middle green
LED lights
medium
loud
The laser line is not
detected
·
no beep
·
no LED indication