DT Research DT382DN Basic Operation Manual

Rugged tablet

Download this manual

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131

DT382DN

INTRODUCTION

The DT Research DT382DN Rugged Tablet features the integration of a high

brightness 8" capacitive touch screen and a high performance yet energy efficient

processor within a slim, lightweight, durable package. With built-in Wi-Fi and a

smart card reader as well as options for back camera, barcode scanner, GNSS, NFC,

and UHF RFID reader, this robust tablet offers seamless information capture and

transmission for improved workflow. Rated IP65 and MIL-STD-810H, the DT382DN

Rugged Tablet provides reliable operation in harsh, mission-critical environments.

PACKAGE CONTENTS

•

One DT382DN

•

One Battery Pack and Handstrap

•

AC-DC Power Adapter

•

Basic Operation Guide

* The actual package contents may vary depending on the configuration acquired.

BOG031924 DT382DN ENG

Rugged Tablet

Need help?

Do you have a question about the DT382DN and is the answer not in the manual?

Page 1 Rugged Tablet DT382DN INTRODUCTION The DT Research DT382DN Rugged Tablet features the integration of a high brightness 8” capacitive touch screen and a high performance yet energy efficient processor within a slim, lightweight, durable package. With built-in Wi-Fi and a...
Page 2 To activate DT382DN, push and quickly release the Power Button. The display will come on in a few seconds. To put the DT382DN in standby mode, push and quickly release the Power Button. To turn the DT382DN off for extended storage, power off safely using any software function that “shuts down computer”...
Page 3 The 8” display provides clear information for security staff to effortlessly monitor the If your DT382DN comes with an RFID Reader refer to the steps below to configure the screening systems, while the pole/vehicle mount cradle provides stable operation for settings.
Page 4 • DO NOT carry around the DT382DN rugged tablet when operating. • DO NOT use the DT382DN rugged tablet when it is not properly mounted onto the pole/vehicle mount cradle. Federal Communication Commission Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.