DT Research DT302RP Product End-Of-Life Disassembly Instructions

Product End-of-Life Disassembly Instructions
Product Name / Model: Rugged Tablet / DT302RP
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of DT Research products to remove components and materials requiring selective treatment, as
defined by EU Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and
electronic equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards Assemblies (PCBA)
Mass storage device
Batteries
Mercury-containing components
LCD Display
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and
toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
Notes
With a surface greater than 10 sq cm
Permanently soldered to PCBA
All types including standard alkaline and
lithium coin or button style batteries
For example, mercury in lamps, display
backlights, scanner lamps, switches,
batteries
a surface greater than 100 sq cm includes
background illuminated displays with gas
discharge lamps
Include the cartridges, print heads,
tubes, vent chambers, and service
stations.
Quantity of
items included
in product
1
0
2
0
1
0
0
0
1
0
0
0
0
0
0