Page 1
DT300Q INTRODUCTION Thank you for acquiring the DT300Q, part of DT Research’s line of tablets. Featuring a slim yet robust enclosure, the DT300Q with 8” TFT display is powered by the Intel® Atom™ quad-core or Qualcomm octa-core processor, offering optimal combinations of performance and power savings. The DT300Q is available with Microsoft®...
DT300Q: Input/ Output Ports Button Functions Headphone Jack BUTTON ACTION USB Port power button Programmable Button without the DC Power Input scanner module As Scanner Trigger when equipped with the scanner module Back Camera (optional on DT380CR) Battery Latch Barcode Scanner (optional)
A DT300Q typically integrates an 802.11ac wireless LAN (WLAN) adapter that may connect to other wireless devices or access points. If your DT300Q does not come with such a network adapter, please consult your device provider to establish the desired network connectivity.
Powering ON and OFF To activate the DT300Q, push and quickly release the Power Button. The display will come on in a few seconds. To put the DT300Q in Standby mode, push and quickly release the Power Button. To turn the DT300Q off for extended storage, power off safely using any software function that “shuts down computer”...
The DT300Q is often delivered with an embedded (user-inaccessible) 802.11ac WLAN adapter equipped with a hidden custom antenna. • Through the support of typical WLAN adapters, the DT300Q should be able to detect all 802.11 access points in the vicinity for you to select the access point of your choice for connection.
USING THE MOBILE TABLET Peripherals Support Through its USB port, the DT300Q supports a wide range of USB-based peripherals. These peripherals are applicable for software installation, applications storage, data storage, and system software recovery and updates. For More Support Users can download the Tablet Modules Basic Operation Guides from the DT Research website.
Need help?
Do you have a question about the DT300Q and is the answer not in the manual?
Questions and answers