Page 1
DT382DN/DT382DH INTRODUCTION Thank you for acquiring the DT382DN/DT382DH, part of DT Research’s line of Rugged Tablets. Featuring a slim yet robust enclosure, the DT382DN/DT362DH with 8” high brightness TFT display is powered by the Intel® Core® i3-N300 or Intel® N200 processor, offering optimal combinations of performance and power savings.
Page 2
Powering ON and OFF To activate DT382DN/DT382DH, push and quickly release the Power Button. The display will come on in a few seconds. To put the DT382DN/DT382DH in standby mode, push and quickly release the Power Button. To turn the DT382DN/DT382DH off for extended storage, power off safely using any software function that “shuts down...
Page 3
Data Capture Module Operation Guide The 8” display provides clear information for security staff to effortlessly monitor the If your DT382DN/DT382DH comes with an RFID Reader refer to the steps below to screening systems, while the pole/vehicle mount cradle provides stable operation for configure the settings.
Page 4
• DO NOT carry around the DT382DN/DT382DH rugged tablet when operating. • DO NOT use the DT382DN/DT382DH rugged tablet when it is not properly mounted onto the pole/vehicle mount cradle. Federal Communication Commission Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Need help?
Do you have a question about the DT382DH and is the answer not in the manual?
Questions and answers