Table of Contents
Advertisement
Description of PC software - Homepage (full sound field)
Temperature
Master audio source selection
Optical
Auxiliary audio source selection
Optical
Pre-set sound
Online sound
effects
effects
Pre-set 1
1
Temperature display
2
File
3
Options
4
Encryption
5
Device voltage display Detect the system operation voltage.
6
Mute button
7
Master volume
Clipping distortion
8
indicator
Master audio source
9
attenuation
10 Pre-set sound effects
Auxiliary audio source
11
selection
Master audio source
12
selection
13 Connection indicator
17
File
Options
Encryption
Master
Device
volume
voltage
Coaxial
Bluetooth
Coaxial
Bluetooth
Pre-set 2
Pre-set 3
Detect the temperature on the device surface.
Load or save scene files on PC, and load or save all scene files.
DSP treble protection, firmware update, noise gate, built-in power amplifier, X-Over
divider data (with channel setting data available), sound zone switch, restore factory
settings, shutdown delay, switch between English and Chinese, check the version
number.
Enter a 6-digit password to encrypt the tuned sound effect data.
Mute the master volume
Push the fader left and right to adjust the master volume in the range of 0 ~ 35.
When the clipping distortion indicator shows yellow, it reminds the user to adjust the
device to make the signal balanced and in a distortion-free state. When the adjustment
is completed, the indicator shows gray (gray by default).
The higher the attenuation of master audio source, the lower the master volume is.
The range of attenuation is 0% ~ 100%.
Multiple sets of pre-set sound effects can be saved or recalled, and recall of online
sound effects is supported.
Switch auxiliary audio source (optical, coaxial, Bluetooth, high voltage level, low
voltage level and off).
Switch master audio source (optical, coaxial, Bluetooth, high voltage level and low
voltage level).
Connect the PC and the host machine with a USB cable. Open the software to connect
the device. Click it again to turn off the connection.
Clipping distortion indicator
Homepage
High voltage level
Low
voltage
level
High voltage
Low
level
voltage
level
* Click the right mouse button to delete pre-set sound
Pre-set 4
Pre-set 5
EQ
Delay
Frequency
combination
Master audio source
attenuation
OFF
effects.
Pre-set 6
Advertisement
Table of Contents
