Maintenance - Klutch 114832 Owner's Manual

The user must only carry out the maintenance and service work described in this Operator's
•
Manual. More extensive work must be carried out by an authorized service workshop.
The engine should be switched off, and the stop switch in STOP position.
•
Wear personal protective equipment. See under heading "Personal protective equipment".
•
The life span of the machine can be reduced and the risk of accidents can increase if machine
•
maintenance is not carried out correctly and if service and/or repairs are not carried out
professionally. If you need further information please contact your nearest service workshop.
Maintenance schedule
Daily maintenance
Cleaning
External cleaning
Cooling air intake
Functional inspection
General inspection
Throttle lockout•
Stop switch*
Blade guard*
Cutting blade**
Water delivery system
Check for fuel leaks
Cleaning
External cleaning
Clean the machine daily by rinsing it with clean water after the work is finished.

Cooling air intake
Clean the cooling air intake when needed

Spark Plug
If the machine is low on power, difficult to start or runs poorly at idle speed: always check the

spark plug first before taking other steps

Maintenance

⚠WARNING
Weekly maintenance
Cleaning
Functional inspection
Vibration damping system*
Muffler*
Drive belt
Carburetor
Starter housing
Page 31 of 40
Monthly maintenance
Cleaning
Spark plug
Fuel tank
Functional inspection
Fuel system
Air filter
Drive gear, clutch