f. GENERAL
VESUMIE
HUN
ELE
ITEHL
Remote Control Using an RM-M7G
(When the adaptor is attached to the DXC-325/325P video camera head)
Connections and setting of the camera select switch
Coaxial cable
with BNG
DXC-325/325P with CA-325A/AP
connectors
Video monitor
Camera select switch:
Set to 2.
Operation
¢ HM : These switches and controls do not function.
© See the RM-M7G's Operating Instructions to use the RM-M7G.
Lights up when power is supplied to the RM-M7G.
Note that a color bar signal is output even
when this switch is set to the TEST position.
1-4
CA-325A/AP(UC,E K)