Configuration Edit/Display - Paradyne Hotwire 8777 Installation Instructions Manual

Configuration Edit/Display

The Configuration Edit/Display screen is displayed when the current, customer, or
default configuration is loaded and allows groups of configuration options to be
displayed. To access the Configuration Edit/Display screen, follow this menu
selection sequence:
For more information on configuration option settings, see Configuration Options
in the User's Guide.
8700-A2-GN10-40
Main Menu Configuration
– or –
Main Menu Configuration
Select . . . To Access the . . .
Network Network Interface Options
DSX-1 DSX-1 Interface Options
G.703 G.703 Interface Options
Copy Ports Copy Ports Options
System Options System Options
System Clock System Clock Options
Cross Connect Cross Connect Mode Options
Assign Time Slots Options
Management Telnet Session Options
and
General SNMP Management Options
Communication
SNMP NMS Security Options
SNMP Traps Options
Inband Management Channel
Options
NOTE:
The SNMP NMS Security Options screen is not available in IP Conservative
mode.
March 2003
Current Configuration
Default Factory Configuration
To Configure the . . .
DSL interface ports.
DSX-1 interface ports
(Model 8777).
G.703 interface ports
(Model 8779).
DSL network and DTE
interface ports by copying
options from port to port.
General system options of
the unit.
LTU system clock options.
DS1 and DS0 cross-connect
ports.
Management support of the
unit through SNMP, Telnet,
and the Inband
Management Channel.
9