Entering Identity Information; Configuring The Unit; Accessing And Displaying Configuration Options - Paradyne Hotwire 8777 Installation Instructions Manual

Entering Identity Information

After accessing your unit for the first time, use the Change Identity screen to
determine SNMP administrative system information that will be displayed on the
Identity screen of the Status branch. To access the Card Identity screen, follow this
menu selection sequence:

Configuring the Unit

Configuration option settings determine how the unit operates. Use the
Configuration branch of the termination unit's menu to display or change
configuration option settings.
The unit is shipped with factory settings in the Default Factory Configuration area.
If the factory default settings do not support your network's configuration,
customize the configuration options for your application.

Accessing and Displaying Configuration Options

To display the configuration options, you must first load a configuration option set
into the edit area.
To load a configuration option set into the configuration edit area, follow this menu
selection sequence:
Make a selection by placing the cursor at your choice and pressing Enter.
8
Main Menu Control
Main Menu Configuration (Load Configuration From)
If you select . . . Then . . .
Current The selected configuration option set is loaded and the
Configuration Configuration Edit/Display menu screen appears.
Configuration The Configuration Loader screen is displayed allowing you to
Loader upload or download configurations from a TFTP server.
Default Factory The default factory configuration is loaded and the Configuration
Configuration Edit/Display menu screen appears.
March 2003
Change Identity
8700-A2-GN10-40