Elation KL CYC S User Manual page 11

I N S TA L L AT I O N G U I D E L I N E S
RIGGING
Overhead rigging requires extensive experience, including calculating working load limits,
knowledge of installation material being used, and periodic safety inspection of all
installation material and the fixture, among other things. If you lack these qualifications, do
not attempt the installation yourself. Improper installation can result in bodily injury.
OMEGA BRACKETS WITH CLAMP INSTALLATION
Insert the Omega Brackets into the matching holes on the bottom of the fixture. Note that
Omega Brackets are slotted to allow positional adjustment. Secure the Omega Brackets to
the fixture by turning each quick-lock fastener ¼ turn clockwise; making sure the fastener is
completely locked. Omega Brackets can be installed into the fixture base as illustrated below.
MOUNTING THE FIXTURE ON A TRUSS USING CLAMPS WITH OMEGA BRACKET
When mounting the fixture to a truss, be sure to secure an appropriately rated professional
grade rigging clamp to the included Omega Brackets using an M10 screw fitted through the
center hole of the Omega Brackets. The fixture provides a built-in rigging point for a SAFETY
CABLE (not included). Be sure to only use one of the designated rigging points for the safety
cable and never secure a safety cable to a carrying handle.
11