Lincoln Electric IDEALARC SP-255 Service Manual page 92

F-39
WIRE DRIVE ASSEMBLY REMOVAL AND REPLACEMENT
PROCEDURE
1. Disconnect main input power to the
machine.
2. Remove the Case Top and Side Pan-
els.
3. Remove the drive roll. See Figure
F.13.
a. Remove the thumb screw, drive
FIGURE F.13 - Wire Drive Assembly
Removal
4. Remove the three screws from the
gear box housing using a 5/16" nut-
driver.
TROUBLESHOOTING & REPAIR
hub, and the spacer.
IDEALARC ® SP-255
F-39