Lincoln Electric IDEALARC SP-255 Service Manual page 108

G-4
SchEmaTic - cOmPlETE machiNE (G2799)
ENGINEERING CONTROLLED
MANUFACTURER:
ElEcTrical DiaGramS
CHANGE DETAIL: SCR1 AND SCR2 , REVISED AMPS
No
NOTE: This diagram is for reference only. It may not be accurate for all machines covered by this manual.
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OWNED BY LINCOLN GLOBAL, INC. AND MAY NOT BE DUPLICATED, COMMUNICATED
PROPRIETARY & CONFIDENTIAL:
TO OTHER PARTIES OR USED FOR ANY PURPOSE WITHOUT THE EXPRESS WRITTEN PERMISSION OF LINCOLN GLOBAL, INC.
UNLESS OTHERWISE SPECIFIED TOLERANCE
DESIGN INFORMATION REFERENCE: EQUIPMENT TYPE: SP 255 CONTROL
MANUFACTURING TOLERANCE PER E2056
ON 2 PLACE DECIMALS IS ± .02
DRAWN BY: FEI -
ON 3 PLACE DECIMALS IS ± .002 SCHEMATIC
SUBJECT:
ON ALL ANGLES IS ± .5 OF A DEGREE
t ENGINEER: SCALE:
MATERIAL TOLERANCE (" ") TO AGREE
WITH PUBLISHED STANDARDS. MATERIAL APPROVAL PROJECT
UF 01/25/2007 CRM37912
NONE
DO NOT SCALE THIS DRAWING APPROVED: DISPOSITION: DATE: NUMBER:
G-4
1 1
PAGE ___ OF ___
DOCUMENT DOCUMENT
NUMBER: REVISION:
G2799 A
iDEalarc ® SP-255