Lincoln Electric IDEALARC SP-255 Service Manual page 102

F-49
FAN MOTOR AND FAN REMOVAL AND REPLACEMENT
7. Remove the fan motor.
a. Loosen and remove the two
screws from the motor mounting
bracket using a phillips head
screw driver.
b. When the motor is free from the
mounting bracket, place it care-
fully on the bottom of the ma-
chine.
c. Cut any necessary wire wraps
bundling the motor leads.
d. Remove the leads from the fan
motor.
8. Install the replacement motor in the
reverse order of removal.
9. Install the fan blade. When installing
the fan blade, the blade is flush with
the end of the motor shaft.
a. Spin the fan to be sure it is free
to rotate.
10. Reassemble the remaining compo-
nents in reverse order of removal.
TROUBLESHOOTING & REPAIR
IDEALARC ® SP-255
F-49