Lincoln Electric IDEALARC SP-255 Service Manual page 24

B-6
ARROW KEY OPERATION WHEN USED WITH
PROCESS WIRE/GAS KEY:
See Table B.1.
Left Arrow Keys: Press to set Wire Type. Pressing the
UP and DOWN arrow keys changes the Wire Type dis-
played.
Center Arrow Keys: Press to set Wire Diameter. Press
the UP ( ) arrow key to increase the wire diameter dis-
played. Press the DOWN (
the wire diameter displayed.
Right Arrow Keys: Press to select Welding Gas.
Pressing the UP and DOWN arrow keys changes the
Welding Gas displayed.
The following 16 processes are programmed into the
SP-255:
OPERATION
TABLE B.1 - Arrow Key Functions.
) arrow key to decrease
IDEALARC
Wire Type Wire Diameter
Solid Steel .025 (0.6mm)
Solid Steel .025 (0.6mm)
Solid Steel .030 (0.8mm)
Solid Steel .030 (0.8mm)
Solid Steel .035 (0.9mm)
Solid Steel 035 (0.9mm)
Solid Steel .035 (0.9mm)
Solid Steel .045 (1.2mm)
Solid Steel .045 (1.2mm)
Stainless .035 (0.9mm)
Stainless 035 (0.9mm)
Aluminum (5356) 3/64 (1.2mm)
Outershield .045 (1.2mm)
Outershield .045 (1.2mm)
Innershield .035 (0.9mm)
Innershield .045 (1.2mm)
SP-255
®
B-6
Welding Gas
CO
2
ArCO
2
CO
2
ArCO
2
CO
2
ArCO
2
ArOxy
CO
2
ArCO
2
ArOxy
HeArCo
2
Argon
CO
2
ArCO
2
None
None