Worksheets
G.703-to-G.703 Configuration
A-2
To connect two G.703-compatible units, configure the units as follows. Terminal
Mode factory defaults are in bold (for Switchpack mode defaults, see
Appendix
C).
Configuration
G.703-Compatible Unit
Option
(Customer Premises)
Card Type
CP (default)
E1 Line Code
HDB3 or AMI
Framing
Framed or Unframed
September 1997
G.703-Compatible Unit
(Central Site)
CO
Must be same as CP side
Must be same as CP side
7915-A2-GB20-20