Table of Contents
Advertisement
7915-A2-GB20-20
The following example shows the Board Configuration displayed for a CO unit.
CO units may be configured for either an internal or external timing source.
Command
3
Board Configuration:
1) SDSL Card Type
SDSL Interface
2) Payload Rate
3) Timing
SDSL FW Rev
Globespan FW Rev – 1.12
CP Serial #
–––––––––––––––––––––––––––––––––––––––––––––
1–3)
Board Configuration
4)
Switchpack Definitions
?)
Prints Board Configuration and this menu
R)
Quit
Config
The SDSL rate type, firmware revision numbers, and serial number displayed on
the Board Configuration screen cannot be changed. Refer to page 5-5 for
information on using the
Possible values each configuration option are listed in
September 1997
Customizing V.35/V.11-Compatible Units
– CO
– V.35
– 512 Kbps (8x64)
– Internal
– 4.3
– 85649
Switchpack Definitions
option.
Table
5-1.
5-3
Advertisement
Table of Contents
