Physio Control LIFEPAK 1000 Manual

LIFEPAK 1000
®
Getting Started
Thank you for purchasing the LIFEPAK 1000 defibrillator. You have joined
lifesaving teams around the world who are committed to meeting their
diverse defibrillation needs. This guide provides the information you need
to get started.
Please complete these five easy steps to get started.
Check the contents of the LIFEPAK 1000 defibrillator box.
1
a. Carefully remove the defibrillator from the boxes you receive.
b. Check the contents of each box to be sure everything listed on the packlist is included.
c. Examine the outside of the defibrillator, battery and any accessories for signs of damage
that may have occurred during shipping.
d. If possible, save the shipping boxes and inserts in case you need to ship the defibrillator
in the future.
Install the LIFEPAK 1000 battery in the defibrillator.
2
The LIFEPAK 1000 defibrillator can be powered by two types of batteries:
- a nonrechargeable Lithium manganese dioxide battery
- a rechargeable Lithium-ion battery
For rechargeable batteries only: You must fully charge the battery before first use. Insert
the battery into the battery charger and verify that the green LED flashes to indicate that the
battery is charging. Continue charging the battery until the LED changes to steady green.
Only the LIFEPAK 1000 Defibrillator Battery Charger can be used to charge the battery.
For both battery types: Check the charge level before installing the battery in the
defibrillator. Press the button on the battery and check the fuel gauge (row of green lights
above the battery button). You should see four green lights illuminated.
Note: Always carry a spare, fully-charged battery.
DEfibrillator