Protocol Monitor Configuration; Figure 4-9 Protocol Monitor Configuration Screen - Paradyne NP 64 Plus User Manual

Protocol Monitor
Configuration

************************ Protocol Monitor Configuration ************************

Name: F@43802
Protocols [P=] ([P=m,n,...r] and/or [P=m-n] for up to 7 selections)
>> 1) IP<<
2) IP/TCP
3) IP/TCP/TELNET
4) IP/TCP/FTP
5) IP/UDP
6) IP/UDP/SNMP
>> 7) IPX(SNAP)<<
8) IPX/SPX(SNAP)
>> 9) NETBIOS(SNAP)<<
>>10) SNA(SNAP)<<
Help[?]
>
980-001-0221C
March 2001
The Protocol Monitor Configuration Screen allows you to view and alter parameters
for Protocol Monitor and Top IP Traffic collection operations.
The Protocol Monitor Configuration Screen is shown in Figure 4-9.
>>11) APPLETALK(SNAP)<<
>>12) DECNET(SNAP)<<
13) VINES(SNAP)
14) XNS(SNAP)
15) ISO CLNP(IETF)
16) IP/ICMP
17) IP/TCP/SMTP
18) IPX(Raw)
19) IPX/SPX/(Raw)
20) APPLETALK(Raw)
Top Statistics [T=]
>>1) Conversation<<
2) Talk/Listen
3) Disable
Save[SA] Cancel[X]

Figure 4-9 Protocol Monitor Configuration Screen

1. Protocols - Selects up to seven protocols to be monitored, from the protocol list
displayed. All protocols to be monitored must be entered with a single command.
Can be selected individually, in a range, or group. Selected items are bracketed by
">>"....."<<" characters as shown in item #1 on the example screen above. Enter
"P=" followed by nothing or a space to deselect all (factory default). Parenthesis
indicate the subset under which a protocol is grouped, such as SNAP (Refer to
"Encapsulation" on page 4-12 in this manual for details).
2. Top Statistics - Selection determines whether the Top IP Traffic collection will be
based on the top User "Talker" and "Listener," or the top "Conversation" Pair in
each direction. Factory default is "Disable."
Top Talker/Listeners are determined by separately tracking, in the send and re-
ceive direction, the IP address and the total traffic of the most prolific transmitters
and receivers of IP traffic within the measurement interval.
Top Conversation Pairs are determined by separately tracking, in send and receive
direction, IP address pairs of each host/client conversation and the total traffic sent
by each pair during the measurement interval.
Both Top Conversation Pair and Talker/Listener are calculated across the aggre-
gate link regardless of the PVC on which the traffic occurred.
FrameSaver NP 64+ User's Manual - Installation Guide
21) DECNET(Raw)
22) VINES(Raw)
23) XNS(Raw)
24) IP/TCP/HTTP
25) IP/TCP/GOPHER
Rank Top Stats By [R=]
>>1) Octets<<
2) Packets
4 Operation
4-23