Dell Inspiron 16 Plus 7640 Owner's Manual page 95

Table 30. System setup options—Overview menu (continued)
Overview
Microcode Version
Intel® Hyper-Threading Capable
64-Bit Technology
MEMORY
Memory Installed
Memory Available
Memory Speed
Memory Channel Mode
Memory Technology
DEVICES
Panel Type
Panel Revision
Video Controller
Video Memory
Wi-Fi Device
Native Resolution
Video BIOS Version
Audio Controller
Bluetooth® Device
Table 31. System setup options—Boot Configuration menu
Boot Configuration
Boot Sequence
Boot Mode: UEFI only
Boot Sequence
Secure Digital (SD) Card Boot
Enable Secure Digital (SD) Card Boot
Secure Boot
Enable Secure Boot
Enable Microsoft UEFI CA
Secure Boot Mode
Expert Key Management
Enable Custom Mode
Displays the microcode version.
Displays whether the processor is Hyper-Threading (HT) capable.
Displays whether 64-bit technology is used.
Displays the total computer memory installed.
Displays the total computer memory available.
Displays the memory speed.
Displays single or dual channel mode.
Displays the technology that is used for the memory.
Displays the panel type of the computer.
Displays the panel revision of the computer.
Displays the integrated graphics information of the computer.
Displays the video memory information of the computer.
Displays the Wi-Fi device installed in the computer.
Displays the native resolution of the computer.
Displays the video BIOS version of the computer.
Displays the audio controller information of the computer.
Displays whether a Bluetooth device is installed in the computer.
Displays the boot mode of this computer.
Specifies the order that the BIOS searches the list of devices to find an
operating system to boot.
By default, Windows Boot Manager is selected.
By default, UEFI Hard Drive is selected.
Enable or disable booting from a Secure Digital (SD) card.
Enables secure boot using only validated boot software.
Default: OFF
Enables UEFI CA to be included in the BIOS UEFI Secure Boot DB.
Default: ON
Modifies the behavior of Secure Boot to allow evaluation or enforcement of
UEFI driver signatures. Deployed Mode should be selected for normal operation
of Secure Boot.
By default, Deployed Mode is selected.
Allows the PK, KEK, db, and dbx security key databases to be modified.
BIOS Setup 95