Table 33. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation
Storage Interface
Port Enablement
Smart Reporting
Enable Smart Reporting
Drive Information
M.2 PCIe SSD
Type
Device
Enable MediaCard
Table 34. System setup options—Display menu
Display
Display Brightness
Brightness on battery power
Brightness on AC power
Full Screen Logo
Full Screen Logo
Table 35. System setup options—Connection menu
Connection
Wireless Device Enable
WLAN
Bluetooth®
Enable UEFI Network Stack
Configures operating mode of the integrated storage device controller.
Default: RAID On. Storage device is configured to support RAID functions.
When enabled, all NVMe and SATA devices will be mapped under VMD
controller. Windows RST (Intel Rapid Restore Technology) driver, or Linux
kernel VMD driver must be loaded in order to boot the OS.
Enables or disables the onboard drives.
Default: ON
Enables BIOS to receive analytical information from integrated drives and send
notifications during startup about possible future failure of the hard drive.
Default: OFF
Displays the information of various onboard drives.
Displays the M.2 PCIe SSD type information of the system.
Displays the M.2 PCIe SSD device information of the system.
Enable or disable the Secure Digital (SD) card.
By default, Secure Digital (SD) Card is enabled.
Sets the screen brightness when the computer is running on battery power.
Default: 40
Sets the screen brightness when the computer is running on AC power.
Default: 40
Enables or disables display of full screen logo if the image matches screen
resolution.
Default: OFF
Enables or disables the internal WLAN device.
Default: Selected
Enables or disables the internal Bluetooth device.
Default: Selected
Enables or disables the UEFI Network Stack.
Default: Selective Enabled
BIOS Setup
97