Table of Contents
Advertisement
MOVING
PARTS
can injure
NOTE
By maintenance at care of the utilizer we intend all the operatios
concerning the verification of mechanical parts, electrical parts
and of the fluids subject to use or consumption during the normal
operation of the machine.
For what concerns the fluids we must consider as mainte-
nance even the periodical change and or the refills eventually
necessary.
Maintenance operations also include machine cleaning operations when
carried out on a periodic basis outside of the normal work cycle.
The repairs cannot be considered among the maintenance
activities, i.e. the replacement of parts subject to occasional
damages and the replacement of electric and mechanic com-
ponents consumed in normal use, by the Assistance Authorized
Center as well as by manufacturer.
The replacement of tires (for machines equipped with trolleys)
must be considered as repair since it is not delivered as standard
equipment any lifting system.
The periodic maintenance should be performed according to
the schedule shown in the engine manual. An optional hour
counter (M) is available to simplify the determination of the
working hours.
IMPORTANT
!
In the maintenance operations avoid that pol-
luting substances, liquids, exhausted oils, etc.
bring damage to people or things or can cause
negative effects to surroindings, health or safety
respecting completely the laws and/or disposi-
tions in force in the place.
ATTENTION
!
• Have qualified personnel do maintenance and troubleshooting work.
• Stop the engine before doing any work inside the machine. If for any
reason the machine must be operated while working inside, pay at-
tention moving parts, hot parts (exhaust manifold and muffler, etc.)
electrical parts which may be unprotected when the machine is open
• Remove guards only when necessary to perform maintenance, and re-
place them when the maintenance requiring their removal is complete.
• Please wear the appropriate clothing and make use of the PPE (Per-
sonal Protective Equipment), according to the type of intervention
(protective gloves, insulated gloves, glasses).
• Do not modify the components if not authorized.
- See pag. M1.1 -
ATTENTION
!
Start Automatic or remote
Give full attention to sets equipped with automatic or remote
starting system:
- Emergency generating sets;
- Generating sets with programmable automatic test function;
- Generating sets with remote management via PC, via mo-
dem or GSM modems and other communication systems;
- Remote control;
- Start from remote contact, timer, fuel level sensor, etc.
- TCM remote control.
In these cases you must ensure that the generator will not
start during routine maintenance or repair by doing one of
the following, depending on the type of generator in use:
- Remove power from the generator control board;
- Place the EAS panel connected to the generator in RE-
SET mode;
- Press the emergency button.
NOTE
!
THE ENGINE PROTECTION NOT WORK WHEN THE OIL
IS OF LOW QUALITY BECAUSE NOT CHARGED REGU-
LARLY AT INTERVALS AS PRESCRIBED IN THE OWNER'S
ENGINE MANUAL.
36
MAINTENANCE
M
43
HOT surface
can
hurt you
Advertisement
Table of Contents
