Page 2
DESCRIPTION OF THE MACHINE GE 3200 SX REV.0-08/12 The generating set GE 3200 is a unit which transforms the mechanical energy, generated by endothermic engine, into electric energy, through an alternator. Is meant for industrial and professional use, powered by an endothermic engine; it is composed of various main parts such as: engine, alternator, electric and electronic controls, the fairing or a protective structure.
Page 3
· Competent support in the solution of problems; ofthe International Certification Network IQNet, · Information and training in the correct applicatio- awarded the official approval to MOSA after an- nand use of the products to assure the security examination of its operations at the head office ofthe operator and protect the environment;...
Page 4
INDEX GE 3200 SX REV.0-08/12 DESCRIPTION OF THE MACHINE M 01 QUALITY SYSTEM M 1.01 COPYRIGHT M 1.1 NOTES M 1.4 CE MARK M 1.4.1 DECLARATION OF CONFORMITY M 1.5 TECHNICAL SPECIFICATIONS M 2 ..SYMBOLS USED AND SAFETY PRECAUTIONS M 2.5...
Page 5
(see page M1.1). All rights are reserved to said Company. It is a property logo of MOSA division of B.C.S. S.p.A. All other possible logos contained in the documen- tation are registered by the respective owners.
Notes REV.0-10/02 INFORMATION INFORMATION OF GENERAL TYPE In the envelope given together with the machine and/or Dear Customer, set you will find: the manual for Use Maintenance and We wish to thank you for having bought a high quality set. Spare Parts, the manual for use of the engine and the tools (if included in the equipment), the guarantee (in the Our sections for Technical Service and Spare Parts will...
Page 7
CE MARK REV.5-03/11 Any of our product is labelled with CE marking attesting its conformity to appliable directives and also the fulfillment of safety requirements of the product itself; the list of these directives is part of the declaration of conformity included in any machine standard equipment. Here below the adopted symbol: CE marking is clearly readable and unerasable and it can be either part of the data-plate.
Dichiarazione conformità Konformitätserklärung Declaration of conformity Declaración de conformidad 1.4.1 Déclaration de conformité Declaração de conformidade REV.0-06/10 BCS S.p.A. Stabilimento di Cusago, 20090 (MI) - Italia V.le Europa 59 Sede legale: Tel.: +39 02 903521 Via Marradi 1 Fax: +39 02 90390466 20123 Milano - Italia DICHIARAZIONE DI CONFORMITA' Déclaration de Conformité...
TECHNICAL DATA GE 3200 SX REV.0-08/12 Technical data GE 3200 SX GENERATOR *Stand-by single-phase output 3.1 kVA (2.8 kW) / 230 V / 13.5 A *PRP single-phase output 2.8 kVA (2.5 kW) / 230 V / 12.2 A Frequency 50 Hz Cos ϕ...
SYMBOLS AND SAFETY PRECAUTIONS REV.0-11/99 SYMBOLS IN THIS MANUAL SAFETY PRECAUTIONS DANGEROUS The symbols used in this manual are designed to call your attention to important aspects of the operation of the machine as well as potential hazards and dangers This heading warns of an immediate danger for persons for persons and things.
SYMBOLS AND SAFETY PRECAUTIONS REV.2-06/10 SYMBOLS PROHIBITIONS No harm for persons Use only with safety clothing - STOP - Read absolutely and be duly attentive It is compulsory to use the personal protection means given in equip- ment. Use only with safety clothing - Read and pay due attention It is compulsory to use the personal protection means given in equipment.
Page 12
INSTALLATION AND ADVICE BEFORE USE REV.0-06/00 The installation and the general advice concerning the operations, are finalized to the correct use of the ma- chine, in the place where it is used as generator group and/or welder. Stop engine when fueling Do not touch electric devices if you are barefoot or with wet Do not smoke, avoid flames, sparks or electric tools when fueling.
INSTALLATION AND ADVICE REV.1-06/07 Check that the air gets changed completely and the hot INSTALLATION AND ADVICE BEFORE USE air sent out does not come back inside the set so as to cause a dangerous increase of the temperature. GASOLINE ENGINES Use in open space, air swept or vent exhaust gases, which contain the deathly carbone oxyde, far from the work area.
Page 14
Installazione e dimensioni Luftzirkulation und abmessungen Installation and dimensions Instalación y dimensiones GE 3200 SX Installation et dimensions REV.0-08/12 M1.4 M1.4...
Page 15
UNPACKING REV.1-02/04 NOTE + Be sure that the lifting devices are: correctly mounted, adequate for the weight of the machine with it’s pack- aging, and conforms to local rules and regulations. When receiving the goods make sure that the product has not suffered damage during the transport, that there has not been rough handling or taking away of parts contained inside the packing or in the set.
TRANSPORT AND DISPLACEMENTS COVERED UNITS REV.2-09/11 NOTE Transportation must always take place with the engine off, electrical cables and starting battery disconnected and fuel tank empty. Be sure that the lifting devices are: correctly mounted, adequate for the weight of the machine with it’s packaging, and conform to local rules and regulations.
Do not refuel in the presence RECOMMENDED OIL of fl ames. Avoid spilling fuel. MOSA recommends selecting AGIP engine oil. Any eventual spilled fuel and fumes are Refer to the label on the motor for the recommended fl ammable. Clean any dispersions of fuel products.
GE 3200 SX STARTING - STOPPING GE 4500 HBS GE 4500 HBS-AVR REV.0-01/08 check daily 4. Lightly pull the start-up knob (73) until meeting resi- stance, then pull decisively. + ATTENTION: Allow the start-up knob to re-enter slowly, avoiding having NOTE it knock against the motor and thereby damaging the start-up system.
Page 19
Comandi Bedienelemente Controls Mandos GE 3200 SX Commandes REV.0-08/12 23-24 Descrizione Description Description Descripción Presa di messa a terra Earth terminal Prise de mise à terre Toma de puesta a tierra Presa di corrente in c.a. A.C. socket Prises de courant en c.a.
GE 3200 SX USING THE GENERATING SET GE 4500 HBS / GE 4500 HBS-AVR GE 4500 SX / SXE - EAS / SXE-AVR EAS REV.0-12/11 does not exceed the declared rating; decrease if DANGEROUS necessary. Disconnect the loads and wait a few minutes to allow the thermo-protection to cool down.
Page 21
GE 3200 SX USE AS A GENERATING SET GE 4500 HBS / GE 4500 HBS-AVR 37.1 GE 4500 SX / SXE-EAS / SXE-AVR EAS REV.0-12/11 GENERATION IN C.C. (Continuous Current) ATTENTION Maximum power in c.c.: The batteries produce explosive gas; sparks, P = 120W - V= 12V AC flames, cigarettes, are to be kept far from them.
GE 3200 SX Trouble shooting GE 4500 HBS 40.2 GE 4500 HBS-AVR REV.1-12/11 Problem Possible cause Solution The motor does not start up, or starts 1) Engine switch a in the wrong positions 1) Verify start-up procedure in the Operating Manual...
Page 23
MAINTENANCE REV.0-06/10 WARNING ● Have qualified personnel do maintenance and troubleshooting work. ● Stop the engine before doing any work inside the machine. If for any reason the machine must be operated while working inside, pay at- tention moving parts, hot parts (exhaust manifold and muffler, etc.) electrical parts which may be unprotected when the machine is open.
STORAGE REV.0-06/07 In case the machine should not be used for more than 30 days, make sure that the room in which it is stored presents a suitable shelter from heat sources, weather changes or anything which can cause rust, corrosion or damages to the machine.
Page 25
CUST OFF REV.0-06/07 Have qualified personnel disassemble the In case of necessity for first aid and fire prevention, machine and dispose of the parts, including the see page M2.5. oil, fuel, etc., in a correct manner when it is to be taken out of service.
SPARE PARTS LIST REV.0-03/00 The manufacturer guarantees that any request for spare parts will be satisfied. To keep the machine in full working order, when replacement spare parts is required, always ask for genuine parts only. The requested data are to be found on the data plate located on the machine structure, quite visible and easy to consult.
Page 30
Ricambi Ersatzteile Spare parts Tabla de recambios GE 3200 SX Piéces de rechange REV.0-08/12...
Page 31
Ricambi Ersatzteile Spare parts Tabla de recambios GE 3200 SX Piéces de rechange REV.0-08/12 Pos. Cod. Descr. Note 306411035 SUPPORTO ELASTICO 306202038 RONDELLA 306223100 ALTERNATORE 222622200 MOTORE HONDA 309509005 GUARNIZIONE 102302280 GUARNIZIONE (L=MT.1) 306201145 TELAIO LATO FRONTALE 306228218 PARATIA INFERIORE ALTERNATORE...
Page 32
Ricambi Ersatzteile Spare parts Tabla de recambios GE 3200 SX Piéces de rechange REV.0-08/12...
Page 33
Ricambi Ersatzteile Spare parts Tabla de recambios GE 3200 SX Piéces de rechange REV.1-10/08 Pos. Cod. Descr. Note 1270070 PONTE DIODI 120A 306225030 DISSIPATORE PER PONTE DIODI 306228217 PARATIA SUPERIORE ALTERNATORE 102302280 GUARNIZIONE (L=MT.1) 306467109 PROTEZIONE TERMICA (C.B.) 259107241 PRESA SCHUKO 16A 230V - 2P+T 1302530 SEGNALATORE RETT.22OV AC VERDE...
Need help?
Do you have a question about the GE 3200 SX and is the answer not in the manual?
Questions and answers