Supporting The Motorcycle - Yamaha AG200FEB 2011 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
wise until it stops.
4. Install the holder, and then place
the lens in the original position.
1
2
3
4
5
6
7
8
9

Supporting the motorcycle

Since this model is not equipped with a
centerstand, follow these precautions
when removing the front and rear
wheel or performing other maintenance
requiring the motorcycle to stand up-
right. Check that the motorcycle is in a
stable and level position before starting
any maintenance. A strong wooden
box can be placed under the engine for
added stability.
To service the front wheel
1. Stabilize the rear of the motorcycle
by using a motorcycle stand or, if
an additional motorcycle stand is
not available, by placing a jack un-
der the frame in front of the rear
wheel.
2. Raise the front wheel off the
ground by using a motorcycle
stand.
To service the rear wheel
Raise the rear wheel off the ground by
using a motorcycle stand or, if a motor-
cycle stand is not available, by placing
a jack either under each side of the
7-31
EAU24350 frame in front of the rear wheel or under
each side of the swingarm.