Advertisement
Precautions for Use
Attention
1. Flush and replace cartridges regularly.
2. Do not disassemble parts randomly, it may cause water leak or damage the system.
3. Do not use a power supply that does not have the rated voltage.
4. Please pull the power plug and cut off the feed water valve for long term storage.
5. Do not store or operate in an environment of 32Fº or below.
6. Handle with care when discharging, moving and installing.
Reminder
1. If you home experiences the "water hammer phenomenon*", turn off the feed water supply to the unit immediately.
Letting this hydraulic shock continue may lead to leakage or damage to the filters and filter housings. Our company
does not take responsibility for any damages to the system or for leaks caused by this situation.
2. Please cut off power and source water at once in case troubles occur and ask a professional for assistance.
3. It is normal to hear some vibration sounds when system is producing water.
*Hydraulic shock, commonly known as water hammer or fluid hammer, is a pressure surge or wave caused when a fluid (water), in
motion is forced to stop or change direction suddenly; a momentum change. This phenomenon commonly occurs when a valve closes
suddenly at an end of a pipeline system, and a pressure wave propagates in the pipe. It sounds like hammering in your water pipes.
9
Advertisement
