Advertisement
Standard Faucet
1) Drill a ½" hole in the sink or the counter top, or use an existing hole.
2) Slide chrome cover plate and rubber gasket on to stem of faucet and place faucet
onto sink, with the stem going through the hole.
3) Place metal slotted washer over threaded stem of faucet.
4) Tighten nut from under the counter surface to lock the faucet into place.
5) Thread the faucet connector onto threaded stem of faucet. Do not use Teflon tape.
6) Connect blue 3/8" tubing to faucet connector.
Chrome cover plate
Sink or counter top material
Drain line from air gap
to drain clamp 3/8" red tubing
Drain line to air gap
1/4" red tubing
A compression fitting may be found with the faucet. To make the connections, slide a
compression nut onto the tubing. Slip the white plastic sleeve onto the tubing with the beveled
end towards the end of the tubing. Insert a brass or plastic insert into the tubing, bottom the
tubing into the fitting, slide the nut up and tighten with a wrench. DO NOT OVER TIGHTEN.
Do not use the brass sleeves on plastic tubing, use only plastic sleeves on plastic tubing.
Mounting The Faucet
Rubber gasket
Slotted washer
Metal toothed washer
Faucet nut
Faucet connector
3/8" X 7/16"
Blue 3/8" tubing
Compression Connections
Chrome cover plate
Sink or counter top material
Air Gap Faucet (Optional)
1) Drill a 7/8" hole in the sink or the counter top, or use an
existing hole.
2) Slide chrome cover plate and rubber gasket on to stem of faucet
and place faucet onto sink, with the stem going through
the hole.
3) Place metal slotted washer over threaded stem of faucet.
4) Place plastic spacer over threaded stem of faucet locking in
place, slotted washer onto countertop.
5) Tighten nut from under the counter surface to lock the faucet
into place.
6) Attach red ¼'' drain water discharge line to DRAIN INPUT barb.
And red 3/8'' drain line to DRAIN OUTPUT barb as shown.
7) Thread the faucet connector onto threaded stem of faucet. Do
not use Teflon tape.
8) Connect blue 3/8" tubing to faucet connector.
4
Rubber gasket
Big metal washer
Metal toothed washer
Faucet nut
Faucet connector
3/8" X 7/16"
Blue 3/8" tubing
Connector
White Plastic Sleeve
Brass Insert
Compression nut
Plastic Tubing
Advertisement
