iRobot Roomba Combo Essential RVG-Y1 Owner's Manual page 14

Cleaning the Edge-Sweeping Brush
Pull to remove the Edge-Sweeping Brush. Remove
any hair or debris using the cleaning brush, then
reinstall by aligning the brush and pushing down until
you hear a click.
Cleaning the Multi-Surface Brush
1
Press the brush frame release tabs and lift to
remove brush frame
2
Remove the Multi-Surface Brush
3
Remove any hair or debris from the Multi-Surface
Brush using the cleaning brush
4
Reinstall the Multi-Surface Brush and Brush
frame in the robot
Roomba Combo® Essential robot Owner's Guide
EN
13