iRobot Roomba Combo Essential RVG-Y1 Owner's Manual page 11

Vacuuming & Mopping
Your robot is able to both vacuum and mop at
the same time when the mopping pad plate and
mopping pad is installed.
EN
Before starting a vacuum and mop job, prepare the
room by rolling up / removing any carpets in the area
you want to mop.
NOTE: When the robot is operating with
the mopping attachment, spot clean
will not be available.
IMPORTANT: Do not add liquids such as
hot water, detergent, or disinfectant as
they could damage the robot.
After completing your mopping and
vacuum cleaning job, make sure to
empty the water tank and replace the
mopping pad.
1
Press bin release button to remove bin.
10 For more information, visit global.irobot.com
2
Remove pad plate from bin.
3
Lightly dampen mopping pad and attach to
pad plate.
4
Reinstall pad plate on bin.
5
Fill tank with water.
6
Place bin back in the robot.
7
Place on the floor and press the CLEAN button
on the robot.