Download Print this page

Paradyne 3000 Installation Instructions page 4

Rear connector plate and modular dsu v.35 adapter
Hide thumbs Also See for 3000:

Advertisement

Warranty, Sales, Service, and Training Information
Document Feedback
*3000-A2-GZ41-60*
Copyright E 1999 Paradyne Corporation
4
Table 1 lists the pin assignments for the rear connector plate and the V.35
adapters.
Table 1. Rear Connector and V.35 Adapter Pin Assignments
25-Pin Connector
34-Pin
on Rear
Connector on
Connector Plate
V.35 Adapter
7
4
5
6
8
20
21
18
19
24, 11
P, S
23, 22
R, T
15, 2
U, W
16, 3
V, X
14, 1
Y, AA
9
HH
10
KK
25
NN
* Ring Indicator is available only on a DMB-S or a DBM-V.
Contact your local sales representative, service representative, or distributor
directly for any help needed. For additional information concerning warranty,
sales, service, repair, installation, documentation, training, distributor locations, or
Paradyne worldwide office locations, use one of the following methods:
H
Internet: Visit the Paradyne World Wide Web site at www.paradyne.com.
(Be sure to register your warranty at www.paradyne.com/warranty.)
H
Telephone: Call our automated system to receive current information by fax
or to speak with a company representative.
— Within the U.S.A., call 1-800-870-2221
— Outside the U.S.A., call 1-727-530-2340
We welcome your comments and suggestions about this document. Please mail
them to Technical Publications, Paradyne Corporation, 8545 126th Ave. N.,
Largo, FL 33773, or send e-mail to userdoc@paradyne.com. Include the
number and title of this document in your correspondence. Please include your
name and phone number if you are willing to provide additional clarification.
*3000–A2–GZ41–60*
December 1999
Circuit Name
B
Signal Ground
C
Request-to-Send (RTS)
D
Clear-to-Send (CTS)
E
Data Set Ready (DSR)
F
Received Line Signal Detect (RLSD)
H
Data Terminal Ready (DTR)
J
Ring Indicator (RI) *
L
Local Loopback (LL)
N
Remote Digital Loopback (RL)
Transmitted Data (TXD)
Received Data (RXD)
Transmitter Signal Element Timing – DTE Source
Receiver Signal Element Timing – DCE Source
Transmitter Signal Element Timing – DCE Source
Positive dc Test Voltage
Negative dc Test Voltage
Test Mode (TM)
3000-A2-GZ41-60

Advertisement

loading

This manual is also suitable for:

3000-f1-021