Foscam FI9936P-B User Manual page 78

Note:
1) Please DO NOT forget to set the alarm schedule, the alarm schedule is red.
2) Please make sure your camera time is correct.
3) Please DO NOT forget to set the alarm area, the detected area is covered by the red grids. Or for
some models you can setup 3 detection zones in total.
Step 2: Setup the Storage Location
Go to Settings > Record > Storage Location, and set the "Recording Location" to "SD card and click
Save.
Note:
SD card needs format correctly so it'll be identified by camera, and has enough space for saving the
recordings. It's suggested to use FAT32 for 4G~32G SD card and exFAT for 64G and above SD card.
6.1.7 How to setup alarm Emails
Setup alarm Emails, when camera detects a motion it'll send Email with snapshot to inform about the
motion alarm. Steps as below.
Step 1: Setup Mail Settings
Before you set, please make sure that your email for sender enabled SMTP. And get your Email SMTP
server, SMTP port, TLS information ready.
Please go to Settings > Network > Mail Settings menu to setup your email firstly.
76