Paradyne 3160 Quick Reference page 15

Table 3. Network Interface Configuration Options
Option
NET Framing: NET Framing:
NET Coding: NET Coding:
LBO: LBO:
ANSI PRM: ANSI PRM:
Mgmt Link: Mgmt Link:
NET LLB: NET LLB:
NET PLB: NET PLB:
BitStuff: BitStuff:
Circuit Ident: Circuit Ident:
Factory 1
D4
ESF
AMI
B8ZS
0.0
–7.5
–15
–22.5
Enab
Disab
Enab
Disab
Enab
Disab
Enab
Disab
62411
Disab
Edit
Clear
Factory 2
D4
ESF
AMI
B8ZS
0.0
–7.5
–15
–22.5
Enab
Disab
Enab
Disab
Enab
Disab
Enab
Disab
62411
Disab
Edit
Clear
13
Comments/Description
Selects D4 or ESF framing format. Selects D4 or ESF framing format
Selects AMI or B8ZS line coding Selects AMI or B8ZS line coding
format.
Provides Line Build Out in dB. Provides Line Build Out in dB
Sends ANSI Performance Report Sends ANSI Performance Report
Messages.
Specifies whether the FDL s Specifies whether the FDL's
Management Link is enabled.
Network-initiated LLB allows LLB to Network-initiated LLB allows LLB to
be controlled by inband LLB codes.
Network-initiated PLB allows PLB
to be controlled by FDL PLB to be controlled by FDL PLB
messages.
Provides enforcement of ones Provides enforcement of ones
density protection.
Specifies the transmission vendor s Specifies the transmission vendor's
circuit identifier.