Paradyne 3160 Quick Reference page 13

Table 2. Port Configuration Options (1 of 2)
Option
Port Type: Port Type:
Base Rate: Base Rate:
Net DCLB: Net DCLB:
Port LB: Port LB:
All Ones: All Ones:
Rcv Yellow: Rcv Yellow:
(Received Yellow)
Tx Clock: Tx Clock:
InvertTxC:
(Invert Tx Clock) (Invert Tx Clock)
InvertData: InvertData:
Factory 1
E530
V.35
RS449
X.21
Nx64
Nx56
Disab
V.54
FT1
Both
Disab
DTLB
DCLB
Both
Disab
DTR
RTS
Both
None
Halt
Int
Ext
Auto
Enab
Disab
Enab
Disab
Factory 2
E530
V.35
RS449
X.21
Nx64
Nx56
Disab
V.54
FT1
Both
Disab
DTLB
DCLB
Both
Disab
DTR
RTS
Both
None
Halt
Int
Ext
Auto
Enab
Disab
Enab
Disab
11
Comments/Description
Selects the port type: EIA-530A, Selects the port type: EIA-530A,
V.35, RS449, or X.21.
Enables the port to either Nx56 or Enables the port to either Nx56 or
Nx64 rates.
Network-initiated DCLB, allows Network initiated DCLB, allows
DCLB to be controlled by inband DCLB t b t ll d b i b
V.54 or FT1 (ANSI) codes. 5 o ( S ) codes
Port-initiated Loopbacks, allows p
Loopbacks to be initiated through Loopbacks to be initiated through
the port by the external DTE. e po by e e e a
All ones sent to network (DTE) T1 All ones sent to network (DTE) T1
when DTR or RTS interrupted.
Data port remains enabled, or is p
disabled, on receiving Yellow on disabled on receiving Yellow on
network T1.
Selects whether the transmitted
data clock is internal (TXC) or data clock is internal (TXC) or
external (XTXC).
Selects phase inversion of the
transmit clock (TXC). transmit clock (TXC).
Allows the data on the port to be Allows the data on the port to be
inverted.
d
,
,