Web Interface
To access the web interface:
Procedure
1. Open your web browser. (Internet Explorer Version 6 or above is recommended.)
2. Type http:// and the IP address of the SCP card into the Address field of your
browser window. The default address is 10.10.10.10:
3. A login window appears. Enter the User ID and Password,
and click on OK. The web interface screen appears.
4. Click on the Configuration menu tab. The configuration
screens listed depend on the types of line cards and SCP
card installed in the chassis.
Web Interface – Configuration
The following list shows the web interface Configuration
screens most likely to require modification, along with some of
the fields found on each screen. What fields are displayed
depends on whether the SCP card has an ATM or IP interface.
Refer to the online Help for information.
Configuration
— Region
Configuration
— Port Label
— Administrative State
— G.729 Voice Coder (IP)
— Preferred Voice Coder (IP)
— Preferred Packetization Period (IP)
— Voice Silence Suppression (IP)
— Signaling Type
— TX Gain
— RX Gain
➔
➔
POTS
System
➔
➔
POTS
Port
12