Paradyne 8922 Installation And User Manual page 11

4. Insert the bottom edge of the locking pivot bracket inside the lower edge of the rear
panel cutout next to that connector.
Locking Pivot
Bracket
Rear Panel
Receptacle on Backplane
Cutout
99-16163d-01
5. Align the two connectors.
6. Rotate the connector until it is fully seated.
Rotate
99-16163e-01
7. Tighten the captive screw on the top of the cable's connector.
Tighten Screw
99-16163f-01
11