Paradyne 7520 User Manual page 73

Index
Numbers
511 test pattern, 5-6– 5-7
A
alarm
condition, 4-1
LED, 4-9
ASCII, printable characters, 3-1
ATI
Configuration menu, 3-3
Control menu, 3-1, 6-4
exiting, 2-8
initiating, 2-2
menus, 2-2
monitoring, 4-1
Status menu, 4-2, 4-6, 4-7, 4-8
Terminal Port options, A-8
Test menu, 5-1, 5-3, 5-7, 5-9
timeout, A-8
B
Bilateral Loopback, A-6
C
cables
DDS network, C-6
EIA-232 crossover, C-5
rear panel, C-1
Carrier Control by RTS, Data Port option, A-6
CD (Carrier Detect), RLSD Control option, A-6
clocking, Data Port option, A-5
communication protocol options, A-2
configuration
example, 1-2
option areas, 3-3
option tables, A-1
option worksheets, B-1
saving, 3-2
Configuration menu, 3-3
7520-A2-GB20-20
connectors
EIA-232 DTE, C-3
rear panel, C-1
V.35 DTE, C-4
Control menu, 3-1, 6-4
crossover EIA-232 cable, C-5
CTS
clear to send LED, 4-11
Control option, A-6
customer, configuration areas, 3-3
D
data port
options, A-5
tests, 5-7
Data Port Options, A-5
Data Scrambling, Network Interface option, A-4
DDS, Operating Mode setting, A-2
DDS Line Rate, System option, A-2
defaults, configuration option, 3-3
detecting problems, 4-1
device
messages, 6-1– 6-2
name, 3-1
reset, 6-4
Disconnect Time, Terminal Port option, A-8
displaying
configuration options, 3-3
default configuration, 3-3
identity information, 2-2
revision numbers, 6-4
serial number, 6-4
DM, data mode LED, 4-10
DSR, Control option, A-7
DSU Loopback
network-initiated, A-4
V.54-initiated, A-4
DTE connector, EIA-232 pinouts, C-3
DTE Port, Data Port option, A-5
DTE test, 5-7
DTE-initiated loopbacks, Data Port option, A-5
DTR
data terminal ready LED, 4-11
Monitor option for DTE, A-7
Monitor option for Terminal, A-8
May 1998
IN-1