Navigating The Screens; Keyboard Keys - Paradyne 7520 User Manual

Navigating the Screens

Keyboard Keys

7520-A2-GB20-20
You can navigate the screens by:
Using keyboard keys
Using screen function keys
Switching between the two screen work areas
Use the following keyboard keys to navigate within the screen.
Press . . . To . . .
Ctrl-a Move cursor between the screen area and the screen function
keys area below the dotted line at the bottom of the screen.
Esc Return to the previous screen.
Tab Move cursor to the next field on the screen.
Enter Accept entry or display valid options on the last row of the screen
when pressed before entering data or after entering invalid data.
Ctrl-k Move cursor to the previous field.
Spacebar Select the next valid value for the field.
Delete (Del) Delete character that the cursor is on.
Up Arrow or Ctrl-u Move cursor up one field within a column on the same screen.
Down Arrow or Ctrl-d Move cursor down one field within a column on the same screen.
Right Arrow or Ctrl-f Move cursor one character to the right in a text field.
Left Arrow or Ctrl-b Move cursor one character to the left in a text field.
Ctrl-l Redraw the screen display, clearing information typed in but not
yet entered.
Procedure
To make a menu or field selection:
1. Press the tab key or the right arrow key to position the cursor on a menu or
field selection. Each selection is highlighted as you press the key to move the
cursor from position to position.
2. Press Enter. The selected menu or screen appears.
3. Continue Steps 1 and 2 until you reach the screen you want.
Using the Asynchronous Terminal Interface
May 1998
2-5