Electrolux EWM09311 Service Manual page 55

•
Delayed Start
→ Adds a pause before the start of the programme. The delay time is indicated by LEDs or the Display
(see page 12 or page 24 button 7/5, for Display or LED display, respectively).
→ To start the cycle immediately after the countdown to the delayed start has already begun:
press the Start/Pause button, cancel the delay time by pressing the relevant button, then press Start/Pause
again.
•
Reduced spin speed
Z6 Styling
It can be linked to buttons with 2-5 LEDs, (the possible combinations are shown below):
Maximum - Maximum declared spin speed.
-
- Reduction 1 - Reduction of the spin speed to between the maximum speed and the minimum speed
(400 rpm).
- Reduction 2 - Reduction of the spin speed to between the speed of reduction 1 and the minimum speed
(400 rpm).
Automatic reduction – reduces the maximum speed for the programme by half, but not less than 400 rpm.
-
- No spin - excludes all spin cycles.
Rinse hold - excludes only the final spin, but not the intermediate spins and ends the cycle with
-
water in the tub.
A further spin reduction can be obtained by selecting the "Easy-Iron" option in cotton programmes when the
selected programme envisages a spin speed of more than 900 rpm.
The following tables contain the possible configurations of the "Spin" button depending on the combination of
LEDs.
Button with 5 LEDs
Maximum spin speed (rpm)
Intermediate 1
Intermediate 2
Intermediate 3
Last selection
Button with 4 LEDs
Maximum spin speed (rpm)
Intermediate 1
Intermediate 2
Last selection
Button with 3 LEDs
Maximum spin speed (rpm)
Intermediate 1
Intermediate 2
Button with 2 LEDs
Intermediate 1
Intermediate 2
Technical Support - DMM
600/700 800/900
500 700
400 500
No No
speed speed
Rinse hold Rinse hold Rinse hold
600/700
500
400
No spin
or
Rinse hold
600/700
500
400
Automatic reduction
No spin or Rinse hold
55/124
1000÷1400 1000÷1400
900 900
700 700
No
500
speed
No spin
or
Rinse hold
800/900
700
500
No spin
or
Rinse hold
800/900 1000÷1400
700
500
1300÷1400 1400
1100 1200
900 900
700 700
No spin No spin
or or
Rinse hold Rinse hold
1000÷1400
900
700
No spin
or
Rinse hold
900
700
599 75 58-67 Rev.04