Electrolux EWM09311 Service Manual page 12

Washing machines with electronic control system
Table of Contents

Advertisement

• Sensor no. 3: SPIN SPEED (configurable)
The spin speed is always associated with the second sensor, in
combination with the six LEDs located in the bottom left hand corner
of the display.
The initial spin speed displayed is that set for the chosen programme.
Touching the sensor you can reduce the spin speed, indicated by the LED near the silk-screen printed value
on the control panel coming on. Once the lowest speed has been reached you can, if you wish, select "No
spin", "Stop water in tub" lighting up the relative symbol
programme).
The next selection will be the highest speed available for the selected programme.
The speeds that can be combined with the six LEDs are shown in the following table.
Max spin
800
speed (rpm)
Intermediate
600
Intermediate
400
No
Intermediate
speed
Rinse
Intermediate
hold
Night
Last selection
cycle
• Sensor no. 4-5-6-7 (configurable)
Each of the sensors located on the right hand side of the display can be
combined with a LED and are used to choose one of the following four
selected options:
Delayed start
Extra-rinse
Easy Iron
Pre-wash
Depending on the option/choices, the programme duration time is
updated (via the three digits).
• Sensor no. 8
The function of this sensor is to START/PAUSE.
Touch this sensor to start a washing cycle, or to pause a washing cycle already under way.
It contains two LEDs:
 A yellow one which flashes when the appliance is in set-up, pause; it stays
on when the cycle is under way and turns off when the cycle has ended.
 A red one that flashes (150 ms off, 150 ms on) in the event of an alarm or
incorrect selection, such as: an incompatible option, an incorrect temperature
for the chosen programme or the rotation of the programme selector dial or
the selection of an option while a washing cycle is under way.
Technical Support - DMM
1,000
1,000
1,200
800
800
800
400
600
400
No
No
400
speed
speed
Rinse
No
Rinse
hold
speed
hold
Night
Rinse
Night
cycle
hold
cycle
, or "Night cycle" (if compatible with the selected
1,200-1,400 1,200-1,400 1,400-1,600 1,400-1,600 1,400-1,600 1,400-1,600
1,000
1,000
800
800
400
400
Rinse
No
hold
speed
Night
Rinse
cycle
hold
12/124
1,200
1,200
1,200
800
800
1,000
400
400
800
Rinse
No
Rinse
hold
speed
hold
Night
Rinse
Night
cycle
hold
cycle
599 75 58-67 Rev.04
1,200
1,000
800
No
speed
Rinse
hold

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ewm09312Ewx13611Ewx14931

Table of Contents