Unpacking And Inspecting The Equipment - Zhone 4000E Installation Instructions Manual

Unpacking and Inspecting the Equipment

IPD4-A2-ZZ40-20
HANDLING PRECAUTIONS FOR
STATIC-SENSITIVE DEVICES
!
This product is designed to protect sensitive components from
damage due to electrostatic discharge (ESD) during normal
operation. When performing installation procedures, however, take
proper static control precautions to prevent damage to equipment. If
you are not sure of the proper static control precautions, contact your
nearest sales or service representative.
The following components should be included in the shipping container:
1 – 4000E BLC with 1 fan module and 12 slot covers
4 – Rubber Bumper Screws
2 – Rack Mount Brackets (either 19" or 23", as ordered)
10 – #6 Phillips Bracket Screws
8 – #10 Phillips Rack Screws
8 – #12 Phillips Rack Screws
If there is visible damage, do not attempt to connect the device. Contact your
sales representative.
Unpacking and Inspecting the Equipment
4000E IP Broadband Loop Carrier Installation Instructions
5