Panasonic WJ-MX30 Operating Instructions Manual page 9

ETOP VIEW 3
65)
00
‫ل ا‬ ‫م ا‬ ‫م س‬ ‫س ح‬ ‫م‬ ‫ر‬ ‫ر‬
DEAE MILE
6
per ‫ے ک‬ ‎ OS ON ‫ےہ‬ ‫کک‬ ‫ےہ‬‎ COLOUR, CORRECTION LLIN LAL LMM LOE LLL LLL
ME MAX
0 0,0,
LLL)
‫ل‬ ‫ی‬
2
e Position Section
45. Position On/Off Button (ON)
This button must be pressed to set the position of a
wipe pattern freely using the Positioner/RGB Control
Joystick (46).
46. Positioner/RGB Control Joystick
This joystick has two functions of setting the position
of a wipe pattern and controlling the hue of the source
video signal (A or B).
When the Position On/Off Button (45) is pressed on,
this joystick functions as the positioner.
When the 'Color Correction On/Off Button (48) is
pressed on, this joystick functions as the RGB control.
When it is in the center, it generates the original color
of the source video signal.
AUDIO FOLLO
ty
| Sh |
Will
e Color Correction Section
47. Chroma Level Control (CHROMA)
This control adjusts the color level of the images from
the Source Video Signal. When this control is set to
the center position, it generated the original color level
of the Source Video Signal.
Note:
Noise may be recorded on tape when this control
is set to the MAX position if color input signals are
excessive.
48. Color Correction On/Off Button (ON)
This button must be pressed to correct the color of the
source video signal.