Download Print this page

Panasonic WJ-MX30 Operating Instructions Manual page 25

Digital av mixer
Hide thumbs Also See for WJ-MX30:

Advertisement

When the REVERSE Button (41) is pressed, the keyed‫‏‬
‫٭‬
image and the background image will be reversed.
Reversed
Normal
Two types (shadow, border) and five kinds of edges
are available with the EDGE Button (39).
Wide Border
/d\ » /\ » JÀ»
Wide Shadow
> /t\ = ۵۰-۰
Notes:
1. When a Key image is white, any of 9 colors can be
selected for the threshold edge, solid or graded,
by pressing the Matte Color Selector (5) and the
Graduation Button (4).
2. Matte Color key images always have a black edge.
3. When a line color setting is made at the WJ-KB50,
press the Fill-matte Button (37) and select the C/L
Bar position.
When selecting the Matte Button for Bus input or
Fade Block, matte color setting is also made at the
WJ-KB50.
In this time, the up and down of the screen cannot
be displayed.
4. When
the
Double
picture-in-picture
mode
is
selected with the WJ-KB50
use, WHITE Button
(38) is selected automatically.
And
a line color setting can
be made
at the
WJ-KB50.
In this time, the up and down of the screen cannot
be displayed.
5. When using the WJ-KB15, the color setting from
the WJ-KB15
is not available.
Normal
Narrow
Border
Narrow Shadow
Drop Shadow
2
3
‫ت‬
E-2. External Key
Wipe can be made on the image of A using patterns
with signals supplied from an external camera.
And the image of B can be displayed in the external key
pattern.
Supply external camera output signals to this mixer.
Press the Split Wipe Button
The LED on this button blinks.
Move the Wipe/Mix Lever (58) to the B-bus position
from the A-bus position.
Adjust the Key Slide Control (33) to obtain a clear edge
wipe image.
(15) four times.
SS
Notes:
When the video signal of B-bus is the same as‫‏‬
‫٭‬
that it of the external camera, the perfect pattern‫‏‬
may be not available due to the condition of the‫‏‬
contrast of the pattern.‫‏‬
e
When pressing the Reverse Button (19), image of
A and B shown the above will be reversed.
è
The External Camera Pattern should be white on
a black base.
e
The External Camera Pattern can be edged using
the Wipe Edge Button (16).

Advertisement

loading