Advertisement
90.
91.
92.
93.
94.
95.
96.
97.
98.
Program Out-2 Y/C Output Connector
(PROGRAM OUT 2/Y/C)
The S-video Program Output Signal-2 is provided via
this connector.
Program Out-2 COMP. Output Connector
(PROGRAM OUT 2/COMP.)
The
composite
video
Program
Output
Signal-2
is
provided via this connector.
Program Out-2 Audio Output Jacks
(PROGRAM OUT 2 L/R)
The audio output signals of R-channel and L-channel
from Program Output 1 are supplied via these jacks.
Advance Sync Output Connectors (ADV SYNC)
In the A/B Roll Editing System, the Advance Sync signal
from this connector should be supplied to a playback
VTR which does not have a Time Base Corrector (T.B.C.)
inside.
Note:
Enough
editing accuracy
cannot
be obtained
without this signal.
GPI Input Connector (GPI)
Refer to "INTERFACE" on page 28 for details.
Preview Output Connector (PREVIEW OUT, COMP)
The video
effect of the composite
video
signal is
obtained at this connector regardless of which Program
Out Button is selected, (42) or (43).
RS-232C Control Connector (RS-232C)
Ask your the Panasonic
Dealer for communication
software.
Cooling Fan
Main Power Switch (MAIN POWER)
The unit is in stand-by
mode
when
this switch
is
pressed on. Unless this switch is pressed on, the unit
will not be on even if the (front panel) Power On/Off
Button (1) is pressed.
be ee
تی
Advertisement
