Advertisement
D-5. Picture-in-Picture
Press the WIPE Button (51) to turn on.
Press the Picture-in-Picture
Button (12).
Move the
Wipe/Mix Lever (58) to the B-bus position from the
A-bus position. The following patterns can be selected
by pressing this button.
Double Picture-in-Picture mode
By using the Positioner Joystick (46), the position of
the picture-in-picture scene can be changed
on the
monitor scene.
Notes:
e
When
pressing this button fourth times (Double
Picture-in-Picture mode), Matte Color cannot be
selected.
e
In
the
Double
Picture-in-Picture
mode,
the
picture
quality
is not
same
with
it of single
Picture-in-Picture mode.
e
In the Double
Picture-in-Picture
mode,
position
control is available only up or down direction.
27 =
E.
Basic Operation 4
E-1. Downstream Key
The
following
is
a
detailed
description
of
the
Downstream Key block. This function is mainly used for
superimposing characters or letters for a telopper. The
optional Character Generator WJ-KB50
can be used
for this purpose.
Set the KEY LEVEL Control (33) to the end low position.
س
ت
]
p
IRF.
یا
Select
and
press
the FILL MATTE
Button
(37) for
a Key-Fill signal.
The
Key-Fill signal fills the key
signal.
When the FILL MATTE Button (37) is pressed,
the desired
color can
be chosen
from the MATTE
GENERATOR.
Press the EXT. CAMERA Button (40) for a Key Signal.
(or A-Button (35) or B-Button (36) can be selected)
Press the ON Button (34).
Adjust the KEY LEVEL Control (33) to obtain a clear
edge key image.
Example of using the title card option
In case a title is written on a black card, adjust the KEY
LEVEL Control (33) to obtain a clear edge key image.
Panasonic
Notes :
1.
2.
When the optional Character Generator WJ-KB50
is
used for a key source, set the KEY LEVEL Control (33)
to the low end position.
A jittery EXT. CAMERA signal or a jittery VTR playback
signal can cause a disturbance in synchronization.
Advertisement
